WIKA电子式压力表

应用
采集并显示过程值
传送过程值至控制室，传输信号为4 ... 20 mA、0 ... 20 mA和0 ... 10 V
适用于过压较高的测量点
本地模拟显示，易于读取且无需外部电源
安全应用
功能特性
“即插即用”，无需配置
信号传输符合NAMUR标准
差压测量范围：0 … 1.6 kPa
易于读取的模拟显示，标准尺寸为100和160mm
独立、非线性特性曲线（如对测得流量值进行翻倍或开方）
Applications
■ Acquisition and display of process values
■ Output signals 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V for the transmission of process values to the control room
■ For measuring points with increased differential overpressure
■ Easy-to-read, analogue on-site display needing noexternal power
■ Safety-related applications
Special features
■ No configuration necessary due to “plug-and-play”
■ Signal transmission per NAMUR
■ Differential pressure measuring ranges from 0 … 16 mbar
■ Easy-to-read analogue display with nominal sizes 100 and 160
■ Individual, non-linear characteristic curves (e. g. x2 or √x for flow measurement)